Search This Blog

Principal Parts of Slotter Machine

Principal Parts of Slotter Machine Points : Principal Parts of Slotter Machine, Parts of Slotting Machine, Components of Slotting Machine Principal parts of Slotter Machine are:
1. Base
2. Ram
3. Rotary Table
4. Table
5. Column
6. Saddle
7. Cross Slide
1. Base Base is tightly build with is cast integral by column. Top of the bed and front face of vertical column are perfectly machined to give guideways for saddle and ram respectively. 2. Ram Ram respond perpendicularly up and down motion at its base, it carry cutting tool. It is comparable to the ram of a shaper; but it is extra massive and move vertically, at right angle to work table, in its place of having horizontal movement of a shaper. 3. Rotary Table Rotaty table is a rounded table mounts on top of cross-slide. This table can be rotate by hand or by usual mechanism. Angular graduations on table make easy work to be machined at angles. Table is also providing by an index plate to one on dividing head of milling machine. The use of index plate make certain correct division on parts. 4. Table Table of slotter hold job and is adjustable in cross wise and longitudinal direction. Table can rotate about its center. Hand wheels are given for rotating table with for cross and longitudinal traverse. 5. Column Column is vertical part invented of cast iron with it house the driving mechanism. Vertical front face of column is precisely finished for provide ways beside which ram move up and downward. 6. Saddle Saddle is mounting upon the guideways with might be move towards or away as of the column. Top part of the saddle is precisely finished to give guideways for cross-slide. These guideways are perpendicular to guideways on the base. 7. Cross Slide Cross slide can move similar to the face of column. The circular worktable is mount on top of the cross slide.

No comments:

Post a Comment

Dont paste link here..