Gauges and Gauging - Fill in the Blanks

Gauges and Gauging - Fill in the Blanks Points : gauges and gauging, mechanical engineering, metrology, mechanical technology, mcqs, evaluation, judgment, gauging, rating, consideration, analysis, examination, workup, test, review, objective type question and answer, fill in the blanks Fill in the Blanks

1. Done tail layout gauge is suitable for laying out dove tails for drawers and smaller carcass pieces.
2. Plug gauges may be either single or double ended.
3. Dial gauges or Dial test indicators are used for checking flatness of surfaces parallelism of bars and roads.
4. Wires gauges is used to measured the thickness of sheets or diameter.
5. A good set of gauges will offer both Convex and Concave and allow for their application in awk word location.
6. A gauge is a tool for instrument used to measure Compares a component.
7. In Dial Gauge the dial is divided into 100 equal divisions, each divisions represents a spindle movement of 0.1 mm.
8. A height gauge is a measuring device used either for determining the Height.
9. One advantage of the snap gauge is that it is dial indicating instrument that can be read Directly.
10. Bourdon tube gauges are not very sensitive as compared with other Pressure gauges.
11. Drill Gauge is used to determine a drill bit size.
12. A plain Plug gauge is an accurate cylinder used as an internal gauge for size control of holes.
13. A feeler gauge is a simple tool used to measure Gap widths.
14. A plain caliper gauge with gauging feathers to check the tolerance on the major Diameter.
15. A snap gauge, used in the measurement of plain external dimensions, consist of a U-shaped framed.