Search This Blog

Measuring Instruments - Multiple Choice Questions and Answers

Measuring Instruments - Multiple Choice Questions and Answers Points :measuring instruments, mechanical engineering, metrology, mechanical technology, mcqs, evaluation, judgment, gauging, rating, consideration, analysis, examination, workup, test, review, objective type question and answer, multiple choice questions and answers Multiple Choice Questions and Answers 1. The micrometer principle of measurement is also applied to:
(a) Inside measurement
(b) Depth measurement
(c) Screw threads measurement
(d) All of the above

2. Instrument used for angular measurement.
(a) Protractors
(b) Vernier level protractors
(c) Dial level protractors
(d) All of the above

3. Engineer’s steel rule is a precision measuring instruments and must be treated as such, and kept in a:
(a) Polished condition
(b) Fine condition
(c) Corrosion condition
(d) None of the above

4. The scale can be manufactured in different sizes and scales, the scale is available in:
(a) 150 mm and 30 mm lengths
(b) 600 mm and 1000 mm lengths
(c) All of the above
(d) None of the above

5. Shrinking rules are the scales used in foundry shop and:
(a) Forging shop
(b) Pattern making shop
(c) Welding shop
(d) All of the above

6. The desirable qualities of steel rule are:
(a) Good quality spring steel and clearly engraved Lines
(b) Reputed make and Metric on two edges
(c) Thickness should be minimum
(d) All of the above

7. The joints locate the legs is a straight line during service and also allow the rule to fold into a convenient length.
(a) Measuring Tip
(b) Folding Rule
(c) Hook Rule
(d) None of the above

8. The degree of accuracy which can be obtained measurements with a steel rule or scale depend:
(a) Quality of the rule
(b) Skill of the user
(c) Both of the above
(d) None of the all

9. Intended for use in tailoring or dress making are typically made of flexible cloth or plastic:
(a) Folding rule
(b) Holding rule
(c) Measuring Tip
(d) All of the above

10. It is a metal plate with an optically flat surface which is as a plane of reference:
(a) Angle plate
(b) Surface plate
(c) Both of the above
(d) None of the above

11. The setting of the surface plate is done with the help of screws jack or:
(a) Nut & Bolts
(b) Nails
(c) Adjusting Screws
(d) None of the above

12. The straightness can be measured by the method of:
(a) Straight edge methods and the wedge method
(b) The level method
(c) The autocollimator method
(d) All of the above

13. It consists a scaled glass tube, which contains ether vapour in the form of a bubble:
(a) Engineering parallels
(b) Spirit levels
(c) Dial indicator
(d) All of the above

14. Engineers parallels are available:
(a) Solid type
(b) Box type
(c) Adjustable type
(d) All of the above

15. Combination set the squaring and scale cube used for:
(a) Height measurement
(b) Depth measurement
(c) Both of above
(d) None of all

26. Graduated measuring instruments incorporate graduate spacing representing known:
(a) Circles
(b) Squares
(c) Distance
(d)None of the above

No comments:

Post a Comment

Dont paste link here..