Search This Blog

Safety Rules for Milling Machines

Safety Rules for Milling Machines Points : safety rules for milling machines Milling machines require special safety precautions while being used.
  1. When using cutting oil, prevent splashing by using appropriate splash guards. Cutting oil on the floor can cause a slippery condition that could result in operator injury.
  2. When installing or removing milling cutters, always hold them with a rag to prevent cutting your hands.
  3. Place a wooden pad or suitable cover over the table surface to protect it from possible damage.
  4. Never adjust the work piece or work mounting devices when the machine is operating.
  5. Chips should be removed from the workpiece with an appropriate rake and a brush.
  6. Shut the machine off before making any adjustments or measurements.
  7. While setting up work, install the cutter last to avoid being cut.
  8. Do not attempt to tighten arbor nuts using machine power.
  9. Do not make contact with the revolving cutter.
  10. Use the buddy system when moving heavy attachments.

No comments:

Post a Comment

Dont paste link here..