Search This Blog

Differentiate Electric arc welding and Oxyacetylene Gas welding

Differentiate Electric arc welding and Oxyacetylene Gas welding Points : Differentiate Electric arc welding and Oxyacetylene Gas welding Electric Arc Welding An Electric arc welding is a method, a low-voltage high current in which an electric arc is struck among the work piece and the tip/end of an electrode. One time the arc is reputable, the welding temperature rise directly to on 6500 F°. The heats expand in the arc melts together the work piece and electrode, where the arc impinge and the tip of the electrode wire and its flux as of which molten metal is transfer to the meters pool.
Oxyacetylene Gas Welding An Oxy-acetylene welding is a method to link metal by heating the surfaces to be connected to the melting point with a gas flame, fusing the molten metal into a consistent mass, and then letting it solidify into a single unit. The flame at the cone reaches temperature as high as 5800 to 6300 degrees F. It is bent by burning oxygen and acetylene gases mix in the proper amount in a welding torch. A filler-rod may or may not he used to intermix with the molten pool of the metal being welded. The really high heat depends on the blend of two types of gaseous substance, oxygen and acetylene. Oxygen supports higher combustion: acetylene organism the fuel for burning.

No comments:

Post a Comment

Dont paste link here..