Specifications of a Slotter Machine

Specifications of a Slotter Points : Specifications of a Slotter machine Slotters are commonly specific in conditions of highest length of a stroke. A small concern will show to size of work piece that be able to machined will be not as much of than this size by an sum equal to the top with bottom clearances of tool. The specifications of slotter are:

1. Maximum distance as of clamping surface of table to lower end of ram guide ways 23.62 inches
2. Floor space required through machine 3050 mm x 1800 120 x 70.8 inches
3. Maximum distance as of toot to clamping surface of table 34.25 inches
4. Number of up and down strokes per minute 17.2-71
5. Distance from scaling surface of tool to housing 890
6. Motor speed for drive of machine speed 1400 rpm
7. Longitudinal movement of table 31.49 inches
8. Width and spacing of T-slots 22mm x 160mm
9. Utmost drawing force 19613.3 newton
10. Transverse faction of table 23.62 inches
11. Diameter of circular table 31.49 inches
12. Belt range 3.93 inches
13. Swivel of ram 10°