- Support the top gone two or three turns. This method smash the chips, help to pass up clogging and save the tap as of breaking. Turn the tap onward and back alternately.
- While beating a blind hole it is basic to remove the tap some times and clean the chips as of the hole. Beware when the tap reaches the base; no extreme pressure must be given.
- Put the tap in hole and revolve tap to get create of thread. Check it that it is vertical to face of the work. For make sure this, also use a try square or a good nut as a guide.
- Grip the tape in a proper tap wrench. Correctness way a small tap must be held in a small handle and better in longer grip.
- Choose the right drill size by tapping. Also make sure that the drilling is accurate and vertical.
- Use cutting lubricate while tapping In steel. No lubricate is chosen used on cast Iron.
- Home
- Lathe Machine
- Milling Machine
- Shaper Machine
- Planer Machine
- Slotter Machine
- Hydraulic Machines
- Boilers
- Wood Working Machines
- Work Holding Devices
- Wood Working Tools
- Gauges
- Measuring Tools
- Drilling Machines
- Saws
- Grinder
- Internal Combustion Engine
- Steam Engine
- Welding
- Safety Precautions
- Power Plant
- Gas Turbine Power Plant
- Casting Process
- Water and Steam Turbines
- Metallurgy
- Foundary
- Electronics
- Electrical
- Broaching, Boring Machine
- Auto & Diesel
- Objective
- Technical Theory
Search This Blog
Process for Threading with Taps
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment
Dont paste link here..