Lubrication of Ball Bearings and Roller Bearings

Lubrication of Ball Bearings and Roller Bearings Points : Lubrication of Ball Bearings and Roller Bearings Ball bearing and Roller Bearings are lubricating for the principle

1. To stop corrosion or rust of the bearing surfaces.
2. To disperse the heat up.
3. During all-purpose, oil or light grease is use intended for lubricating ball and roller bearings.
4. To decrease friction and wear among the descending part of the bearing.
5. Toward keep the bearing surfaces as of water, dirt and so on.
6. But present is a option of moisture contact, next potassium or sodium-base greases might be use.
7. May be renowned that too greatly oil or grease reasons temperature of bearing to increase suitable to churn.
8. Simply squeeze mineral oil or calcium-base grease must be use.
9. Temperature must be reserved lower 90°C and in no option a bearing should work greater than 150°C.
10. One more extra benefit of the grease is that it forms a seal to maintain out clay or any other unfamiliar material.