Bending Machine

Bending Machine Points : Bending Machine, Definition Brake Machine for creation bends and folded edges on larger and heavier pieces of metal than are worked on the bar folder the cornice brakes is such a machine. It is easy to work.
1. Lift the bending wing lever until you have the proper bend angle. Bend a few degrees beyond this angle because the metal will spring back slightly.
2. Steal the clamping bar handle and Insert the metal. The bending line must be directly under the front edge of the clamping bar.
3. Constrict the clamping bar by pulling the hold.
Boxes usually are not formed on the cornice brake Instead the box and pan brake is used for this. This machine has removable “fingers” in the clamping bar. These can be adjusted to the inside width of the container. Moldings can be made on the bending machine by using a “Mold.