Dies and it Process

Dies and it Process Points : Dies and it Process, Process for Using the Die Stock Die is prepared of instrument steel have flutes in them used for cutting ends. Thread is tapered slightly on one face to help tool to make easily. Die mount within die-holder is known a Stock. Process for Using the Die Stock

1. Stays put work fine oil and revolve the stock clockwise with anti-clockwise. When the length required attained, remove the stock during turning in reverse method.
2. Put die on rod. Stay your hand over the die with relate pressure so that it create the thread. Make sure up that the die stock is perpendicular to work.
3. Fasten die within stock by pushed size on top. Thread on the opposite side is tapering which help in first die.
4. End of rod which is to be threaded have to be chamfered to assist die to create simply.
5. Adjust the guide for a free fit on top of rod.