Lathe Machine Operation - Fill In the Blanks

Lathe Operation - Fill In the Blanks Points : Lathe Machine Operation - Fill In the Blanks, Lathe machine objective questions Fill in the Blanks

1. Compound rest is used in Taper turning.
2. Types of threads are Internal & External.
3. Formula of TPI= D-d angle = TAN (TPI).
4. In taper turning Angle is produced.
5. Taper turning is a king of Turning.
6. Lathe thread has 9. degree angle.
7. Thread can be measure by Pitch.
8. Formula of offset = TPF x L/24.
9. Depth in square thread is P/2.
10. Knurling has Two types.