▼
Cutting Speed, Feed and Depth of Cut Shaper Machine
Cutting Speed, Feed and Depth of Cut Shaper Machine
Points : Cutting Speed, Feed and Depth of Cut Shaper Machine
Machining of part is carried out to take away the extra metal, take the work to a specified size and
give a level finish to surface. To achieve the preferred goal at least two cuts, one for roughing and
one for finishing are necessary on job. For finest use of machine, a thorough fact of correct speed,
feed and depth of cut is needed. Cutting speed of a shaper mostly depends on (a) the type of objects
to be cut (the harder material, the smaller the speed or vice versa), (b) the total of material to be
detached and (C) the material of cutting tool. Deepness of cut is distance during which the tool digs
in metal through its working stroke. Feed of tool is distance to a cutting tool move to one side in
two repeated cuts. It is not feasible to set a hard and fast rule for speed, feed and depth cut, but
as taking cuts, the cutting speed must be proper, and depth of cut and feed must be proportional.
No comments:
Post a Comment
Dont paste link here..